Monday, January 27, 2014


Today I tackled the defroster.

After disassembly, cleaning and a quick coat of paint, I started by fitting the new motor (NAPA part #655-1020) to the base frame.

There are two paper gaskets that surround the defroster coils--these were toast, so I made new ones from a box.

I then assembled the fan shroud and coil assembly.


After securing the fan to the motor shaft with a set screw, the motor assembly was then bolted into the car.

And then the fan shroud assembly was bolted into place.

Job done for now.

No comments:

Post a Comment