Saturday, February 22, 2014

GT Bucket Seat Test Fit

The way the bench seat fit, I was concerned that the GT Buckets might also interfere with the shifter. So nothing for it but to install them.

The buckets have a metal bracket that fits between them, in effect turning them into a bench seat assembly. That bracket is covered by a center console.

They fit!

Yes, the seats fit, but the clearance to the shifter is very tight:

However, that should be easy to fix--I just need to move the mounting bolts back about an inch.

Now I just need to figure out a way to mount a boot at the base of the shifter. But that's a bit down the road.

No comments:

Post a Comment